Ray5 Series

LONGER How To｜Guide to Connecting Ray5 Mini with LaserBurn (Mobile & PC)

September 16, 2025

Whether you’re a new Ray5 Mini user or looking to refine your LaserBurn skills, this comprehensive guide will walk you through connecting and using the Ray5 Mini with LaserBurn software — both on mobile and computer. Let's dive into everything you need to know to start creating with confidence!CONTENTS

Part 1: Mobile Connection Guide (LaserBurn App)

Part 2: PC Connection Guide (LaserBurn Desktop Software)

Conclusion

Part 1: Mobile Connection Guide (LaserBurn App)

1. Connect via Wi-Fi in AP Mode
In AP mode, your phone connects directly to the Ray5 Mini's Wi-Fi, but will lose internet access. For full internet access, use STA mode.

● Open the LaserBurn app and go to the Home screen. Tap the not connected icon. When prompted with “Allow LaserBurn to access this device?”, select ALLOW ONLY WHILE IN USE to allow the app to search for Wi-Fi.

● Open your phone’s Wi-Fi settings, find the network named LongerLaser_XXXX, and connect with the password 12345678. Then, enter 192.168.0.1 in the app, click Connect, and wait for the “connection succeeded” message.

2. Connect via Wi-Fi in STA Mode (Recommended)
● Open your phone's Wi-Fi settings. In the LaserBurn app, tap the disconnected icon to enter the network configuration screen. Tap Add in the top right corner.

● Tap Scan device, select the LongerLaser_XXXX network, and connect using the password 12345678.

● After connecting, return to the app and select Set STA mode to link the Ray5 Mini to your home router (2.4G only). Enter the router’s password. The indicator light will turn orange (breathing) during connection and green once successful. If it stays orange, restart the process.

● Return to LaserBurn, tap Connect network at the bottom, and ensure your phone is connected to the same Wi-Fi used in STA mode. Once it reaches 100%, tap FINISH to return to the device list.