Longer Laserburn App - Longer B1 connection

The Longer B1 laser engraver now supports the Longer LaserBurn app, available for both Android and iOS devices. This new app allows you to emulate the Longer B1's display directly on your smartphone, enabling file creation and editing, as well as setting cutting and engraving power and speed parameters. The app works similarly to LightBurn, offering an intuitive interface that is easy to use for both beginners and experienced users.

Please note that after updating the firmware, the MKSLaser app and Web Browser Interface will no longer be supported, but you will gain access to the powerful Longer LaserBurn app.

Preparing for the Firmware Update

Before proceeding, you need to update the firmware on your Longer B1. Follow these steps:

1. Download the Firmware and Configuration Files

First, download the firmware update package, which includes the new firmware and the configuration file for LaserGRBL:

https://drive.google.com/drive/mobile/folders/1cMsCv-wTjJ7fkDKehzPs7pqXt50ivix_/18-rHsIJ8Om688f-eFt9TJXP5rDeepAUb/1XPY4dMHMcKfjyktFZhFIb4LZbvL_R4hf?sort=13&direction=a

2. Download and Install MKSLaserTool

Next, download and install the MKSLaserTool update software, and launch the application:

https://drive.google.com/file/d/1KXFudeke1sTATLbbrk4EyCvNW9mEteq7/view?usp=sharing

3. Update the Firmware

Once MKSLaserTool is launched, follow these steps to update the firmware:

1. In MKSLaserTool, select MKS ESP32 Download Tool.
2. Choose the correct port and set the baud rate to 921600.
3. Select the downloaded .bin firmware file.
4. Click Start and wait for the process to finish. Once completed, you’ll see the message “Firmware successfully flashed.”

4. Import the Configuration File

After the firmware update, close MKSLaserTool and open LaserGRBL (if you don’t have it installed, download it from the LaserGRBL website). Then, follow these steps:

1. Open LaserGRBL and select the configuration file you downloaded earlier.
2. Import the configuration file and write it to the Longer B1.

With that, your Longer B1 is now ready for use with the Longer LaserBurn app!

5. Download the Longer LaserBurn App

You can now download and install the Longer LaserBurn app:

• Android Users: Download the stable version from the Google Play Store by searching for “LaserBurn.” Alternatively, you can try out the beta releases from this link.
• iOS Users: Download from the Apple App Store by searching for “LaserBurn.”

Connecting to the Longer B1 via LaserBurn

Once installed, you can connect your smartphone to the Longer B1 in three ways:

1. Wi-Fi Direct Connection

1. Power on the Longer B1 and connect your phone to the LongerLaser_ Wi-Fi network (Password: 12345678).

2. Open the Longer LaserBurn app, tap on “Not Connected.”

3. Go to the device management section, and enter the IP address 192.168.0.1 to establish the connection.

2. Scan Connection

1. Open the LaserBurn app, tap on “Not Connected.”

2. Tap “Add” to scan for devices.

3. Connect your phone to the LongerLaser_ Wi-Fi network (Password: 12345678).

4. Tap “Set STA mode,” select the Wi-Fi network you wish to connect to, and complete the connection.

3. IP Connection (Touchscreen Users Only)

Touchscreen users can directly connect using the device’s IP address by entering the correct IP into the app.

Conclusion

By following these steps, you’ll successfully update your Longer B1 firmware and start using the Longer LaserBurn app. This app provides powerful new features for creating and editing files, controlling cutting and engraving parameters, and managing your laser engraver from your smartphone.

Once the firmware update is complete, the MKSLaser app and Web Browser Interface will no longer be available, but the Longer LaserBurn app offers a much more powerful and intuitive interface for controlling your laser engraver.

If you encounter any issues during the update process, feel free to refer to this guide or reach out to our technical support team.